Systems
Refine Search
Sidebar
Grid View:
1098 Supersprox Rear Sprocket
£85.00
This Supersprox rear sprocket is designed to fit the Ducati 1098. It has 41 teeth and is for a 525 pitch chain, so please check your bike is compatible with these specs. The advantage of this sprocket..
ABS Banjo Bolt
£7.95
This OEM ABS banjo bolt is used on the Panigale and Multistrada, as well as a number of other models. M12 x 29mm. Normal retail price of this bolt from Ducati, is a whopping £12.37!..
ABS Lower Line Guide
£1.80
This plastic guide is designed to secure the ABS hydraulic lines to the monocoque chassis/frame of the Panigale. It is ONLY fitted to bikes with ABS as standard. Due to the intense heat in the engine ..
ABS Upper Line Guide
£1.80
This plastic guide is designed to secure the ABS hydraulic lines to the monocoque chassis/frame of the Panigale. It is ONLY fitted to bikes with ABS as standard. Due to the intense heat in the engine ..
AMP Tyco SS-1WY Connector
£1.75
Typically used on a variety of Ducatis, ths AMP/TYCO Superseal Connector kit comes with all the necessary pins, rubber seals,
locking clips and connector bodies. Tyco use a colour grading on their..
Bosch EV1 Injector Plug
£4.95
Bosch "EV-1" 2-pin female connector plug. Fits on a variety of Ducatis. Please check against your own bike for compatibility. Connector is supplied with two terminals, two seals and two rubb..
Brembo Front Brake Lever
£7.50
This is an original OEM Brembo front brake lever to fit either an early Ducati Monster (620, 695, 696, 750, 795, 800, S2R) or an early Multistrada (620). These levers cost an
eye-watering £31.88 +..
Brembo OEM Rear Brake Caliper
£215.00
This OEM P2/34 Brembo titanium finish rear brake caliper, was removed from a brand new Panigale V4 with zero mileage. It comes complete with it's original pads, which are obviously in perfect cond..
Brembo Stylema® Front Brake Calipers
£810.00
Compared to previous calipers, Stylema® has less volume around the pistons and brake pads, reducing the internal space occupied by brake fluid, to offer a more immediate response. The two ribbed a..
Front Caliper OEM Bleed Nipple
£1.50
Front caliper OEM bleed nipple used across a wide variety of Ducatis, with an M8 thread (1.25 pitch)...
HEL ABS SS Banjo Bolt
£3.50
M12 fine pitch stainless steel ABS banjo bolt, as used on the 1199/1299 Panigale and Multistrada ABS equipped bikes.
Pre-2015 Panigale models utilized two sizes of bolts on the ABS unit. Two M12 a..
HEL SS Banjo Bolt Kit
£2.50
This kit comprises of two M10 fine pitch stainless steel banjo bolts and four copper crush washers. Manufactured by
HEL Performance. An ideal replacement for your original items, which are prone t..
LED Number Plate / DRL Bulb
£3.00
This wedge style high intensity LED bulb is designed as a direct replacement for your original item. The bulb is made up of nine white LED elements to produce omni-directional light and is a huge impr..
LED Running Light Bulb
£1.50
These high intensity LED running light bulbs, are designed as a direct replacement of your stock incandescent bulbs. The stock
OEM bulb is typically fitted to certain early Ducati models such as t..
Monster 620ie Clutch Line
£25.00
Clutch hydraulic line removed from a Ducati Monster 620ie and in perfect condition, save for some slight discolouration of the
end fittings, which is purely cosmetic and a compression mark in the ..
Monster 620ie Rear Brake Line
£15.00
Rear brake hydraulic line removed from a Ducati Monster 620ie and in perfect condition, save for some slight discolouration of
the end fittings, which is purely cosmetic. Save yourself a fortune o..
OEM 245MM Rear Brake Disc
£39.99
This disc was removed from a 2003 Monster 620ie, though is commonly fitted to numerous other models. It is in remarkably good condition, without any scoring present, save for normal wear and tear. It ..
OEM Banjo Bolt
£1.40
This is an original OEM Brembo banjo bolt. Universal fit for almost every Ducati model. Dimensions are M10 x 19mm...
OEM Number Plate / DRL Bulb
£1.50
This wedge style OEM bulb is designed as a a direct replacement for your original item. Quick and simple to fit. Depending on
your model, it is used either as a number plate light bulb or as a run..
OEM Running Light Bulb
£1.50
This is an OEM direct replacement 12V-6W H6W running light bulb, that fits into your headlight. The stock OEM bulb is typically
fitted to certain early Ducati models such as the Monster 400, 620, ..