This clever brake light modulator from Visible Technologies (Vizi-Tec) is a simple plug 'n' play affair, courtesy of it's dedicated OEM style connectors suitable for the Ducati 848/1098/1198. Normal retail price for this US manufactured modulator is approx £76.00 plus international shipping.

How It Works

It's a proven fact that motorcycles can decelerate more rapidly than most cars and trucks. The combination of a motorcycle's narrow profile and the brisk change in velocity during braking is the most common cause of rear end accidents involving motorcycles, and often the results are fatal to the rider. Vizible Technologies™ SupaBrake modulator is designed to enhance the reaction time of the vehicle behind you. It pulsates your motorcycle's brake light with a variable number of flashes, calculated by its embedded algorithm. The algorithm is based on the rate at which you apply your brakes. As a result, the brake light is flashed in a more subtle manner at lower speeds (when brakes are frequently used), and more aggressively at higher speeds (when brakes are not used for longer time intervals). Whereas other simpler products on the market continuously blink the brake light with an annoying repeating sequence, each and every time the brakes are applied, 'Supabrake II' pulses in driving conditions when you need to get the immediate attention of drivers without annoying them.

Upon applying the brakes, the SupaBrake sends a burst of pulses to your motorcycle's brake light. The duration of the burst is a function of the time elapsed between the current brake cycle and the previous. After the burst, the unit allows the rear brake light to function normally (solid brake light). This algorithm is designed to eliminate target fixation as found in cheaper, passive versions that continuously blink the brake light, even though the vehicle is at a complete stop.

At Lower Speeds

When the frequency at which the driver/rider applies the brakes increases, (i.e. during low speeds such as city driving), the shorter the burst of flashes to the rear brake light will be. If the brakes are applied within 0-12 seconds, the brake light will NOT flash, thus allowing it to function normally (solid brake light). This condition is most valuable during heavy stop-and-go traffic so as not to annoy the person or police in the vehicle behind you.

At Cruising / High Speeds

When the frequency at which the driver/rider applies the brakes decreases, (i.e. at cruising speed), the longer the burst to the rear brake light will be. This condition is most valuable during quick sudden deceleration at speeds which require a rapid reaction to changes in traffic conditions or other driver's intentions. It has been scientifically proven that a quick flashing of a vehicle's brakes will alert the driver behind much sooner and the SupaBrake Modulator does this for you.

Don't put other outdated bulkier modules on your motorcycle that pulsate your brake light each and every time you apply your brakes. Most of these cheaper modules will continue to flash your brake light with the same irritating routine even when you are completely stopped in traffic. This is not only illegal and annoying it detracts from the visual appearance of your vehicle and other drivers/riders attention to the road. Some of these passive flashers will claim to have an accelerometer module that will supposedly give you a couple of hundreds milliseconds reaction time. We have lab tested and road tested such products. They simply do not work due to the nature of engine vibration, road vibration and mounting angle. These accelerometers were not designed for the automotive environment but rather for gentler hand held devices. Due to the many vectored noise components (vibration) they resulted in poor response and sensitivity.

My Cart

Currency:

SEARCH BY STOCK

BEST SELLERS

CUSTOMER SERVICES

Free Shipping

Online Support

30 Day Returns

Secure Payments

Vizi Tec

Accessories

Apparel

Components

Systems

VT Brake Light Modulator