Grid View:

Brembo Front Brake Lever

This is an original OEM Brembo front brake lever to fit either an early Ducati Monster (620, 695, 696, 750, 795, 800, S2R) or an early Multistrada (620). These levers cost an eye-watering £31.88 +..

Front Caliper OEM Bleed Nipple

Front caliper OEM bleed nipple used across a wide variety of Ducatis, with an M8 thread (1.25 pitch)...

Hyd / Coolant Pipe Clamp

This pipe clamp is used primarily to secure hydraulic rubber pipes to fluid reservoirs and master cylinders, though is often used to secure fuel breather pipes or coolant overflow pipes to a radia..

OEM 245MM Rear Brake Disc

£15.00 £39.99
This disc was removed from a 2003 Monster 620ie, though is commonly fitted to numerous other models. It is in remarkably good condition, without any scoring present, save for normal wear and tear. It ..

OEM Banjo Bolt

This is an original OEM Brembo banjo bolt. Universal fit for almost every Ducati model. Dimensions are M10 x 19mm...

Panigale Clutch Lever

This clutch lever was removed from an 1199 Panigale. You will need the small actuating bobbin to clip into it from your original lever, which fits into the recess shown in the pictures. These reta..
Showing 1 to 6 of 6 (1 Pages)