Washers

Grid View:

ACCU 16/10/2 Shim Washer

(0)
£0.75
A2 stainless steel 16mm x 10mm x 2mm shim washer. DIN988..

ACCU M4 Form C Washer

(0)
£0.35
A2 stainless steel "Form C" flat washer...

ACCU M5 Form C Washer

(0)
£0.45
A2 stainless steel "Form C" flat washer...

ACCU M5 Serrated Washer

(0)
£0.45
A2 stainless steel serrated washer...

ACCU M6 Form B Washer

(0)
£0.55
A2 stainless steel "Form B" flat washer. BS4320..

ACCU M6 Serrated Washer

(0)
£0.55
A2 stainless steel serrated washer...

ACCU M6 Spring Washer

(0)
£0.55
A2 stainless steel spring washer...

ACCU M6/OD18 Washer

(0)
£0.55
Stainless steel washer. Outside diameter 17mm...

Cylinder Head Stud Washer

(0)
£0.75
These cylinder head stud washers (ID: 10.5mm x OD: 21mm x Thickness: 2mm) are for both the air-cooled and water-cooled two and four valve engines and fit a multitude of models. Check the dimension..

M3 OEM Washer

(0)
£0.25
OEM replacement washer used to secure, amongst other things, the number plate mounting bracket and also the rear reflector on many of the Ducati models. Especially prevalent on early Monsters, suc..

M5 A2 Stainless Washer

(0)
£0.40
DIN125A, A2 stainless steel washer...

M5 A4 Stainless Washer

(0)
£0.45
DIN125, A4 marine grade stainless steel washer...

M6/OD17 SS Washer

(0)
£0.55
Stainless steel washer. Outside diameter 17mm...

M8/OD24 SS Washer

(0)
£0.65
Stainless steel penny washer. Outside diameter 24mm...

OEM 18/5.2/1 Washer

(0)
£0.95
This washer is used extensively across Ducati's range. For example it is typically fitted at various points on the airbox of a Panigale V4 to retain the Map sensors in position and to retain the r..

OEM M3 Nylon Fairing Washer

(0)
£0.08
OEM M3 nylon washer, useful where you need to isolate the bolt head from a painted surface, such as when fitting the plexiglass screen torx bolts. Dimensions are as follows. OD: 8mm, ID: 4mm, Thickne..

OEM M5 Nylon Fairing Washer

(0)
£0.18
M5 nylon fairing washer used extensively across all the Ducati range of motorcycles. Frequently lost or omitted by garages when refitting bodywork, this washer prevents the fairing bolts from scra..

OEM Nylon Shoulder Washer

(0)
£0.40
This nylon washer is used on a multitude of Ducati models, usually in conjunction with a shouldered bolt, to prevent damage to paintwork on fairing panels. It is also used on the DQS quickshifter ..

OEM Spring Retaining Washer

(0)
£0.95
This special spring washer is used extensively across Ducati's range and is primarily fitted to fairing panels, to retain any sound deadening panels in position. It is typically a push fit over a ..

OEM Steel Washer

(0)
£0.95
This washer is used extensively across Ducati's range. For example it is typically fitted at various points on the airbox of a Panigale V4 such as securing the battery mounting tray to the airbox...
Showing 1 to 20 of 23 (2 Pages)